Path:okDatasheet > Semiconductor δελτίο > MaximIC Datasheet > MaximIC-69

6EPD MAX6318MHUK50CY-T MAX6316MUK35BW-T ICL7622BMJD MAX753CSE MAX4275ADEUA MAX6318MHUK49DW-T MAX2421EAI MAX4581ASE MX7528JN MAX333AEPP MAX6315US47D4-T MAX5250ACPP MAX1092ACEG MAX404ESA MAX6321HPUK28CX-T MAX8867EUK50-T MAX6334UR19D2-T MAX8873REUK-T MAX4551EPE MAX122BEWG MAX197BENI

MaximIC Datasheets Κατάλογος-69

Μέρος αριθΚατασκευαστήςΕφαρμογή
MAX9050BEUK-T MaximICMicropower, single-supply, single comparator + precision reference IC.
MAX4066EPD MaximICLow-cost, low-voltage, quad, SPTS, CMOS analog switch.
MAX6318MHUK50CY-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec
MAX6316MUK35BW-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 6.3ms
ICL7622BMJD MaximICDual operational amplifier, 5mV
MAX753CSE MaximICCCFL backlight and LCD contrast controller. Negative LCD contrast.
MAX4275ADEUA MaximICDual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 1, 1+ (Rf/Dg) noninverting gain 2, -3dB BW 590kHz.
MAX6318MHUK49DW-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms
MAX2421EAI MaximIC900 MHz image-reject transceiver.
MAX4581ASE MaximICLow-voltage, CMOS analog multiplexer (8-channel).
MX7528JN MaximICCMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1 LSB.
MAX333AEPP MaximICPrecision, quad, SPDT, CMOS analog switch.
MAX6315US47D4-T MaximICOpen-drain microprocessor reset circuit. Reset threshold(nom) 4.70V. Reset timeout period(min) 1120ms.
MAX5250ACPP MaximICLow-power, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2.
MAX1092ACEG MaximIC400ksps, +5V, 4-channel single-ended/2-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 0.5
MAX404ESA MaximICVideo operational amplifier.
MAX6321HPUK28CX-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms
MAX8867EUK50-T MaximICLow-noise, low-dropout, 150mA linear regulator. Preset output voltage 5.00V
MAX6334UR19D2-T MaximICUltra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.9V, reset timeout(min) 20ms.
MAX8873REUK-T MaximICLow-dropout, 120mA linear regulator. Preset output voltage 2.80V.
MAX4551EPE MaximIC+-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NC switches).
MAX122BEWG MaximIC500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +1
MAX197BENI MaximICMulti-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface
MAX552ACPA MaximIC+3V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2.
MXD1000UA45 MaximIC5-tap silicon delay line
MAX5183BEEI MaximICDual, 10-bit, 40MHz, current/voltage simultaneous-output DAC.
MAX6358MTUT-T MaximICDual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 3.08V (Vcc3). Active-low open-drain reset. Watchdog timer.
MAX6318LHUK42BW-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.200V min, reset timeout 20ms,typ watchdog timeout 6.3ms
MAX6316MUK45BY-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 20ms, typ watchdog timeout 1.6sec
MAX4074AEEUK-T MaximICMicropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 1.25V/V, noninverting gain 2.25V/V, -3dB BW 70kHZ.

<< 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 >>