| Μέρος αριθ | Κατασκευαστής | Εφαρμογή |
|---|
| MAX5186BEEI | MaximIC | Dual, 8-bit, 40MHz, current/voltage, simultaneous-output DAC. |
| MAX5161MEUT | MaximIC | Low-power, digital potentiometer. R(kom) 100. |
| MX674AKCWI | MaximIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 27. |
| MAX6316LUK29CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX149ACAP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1/2. |
| MAX689ESA | MaximIC | High-accuracy, low-dropout linear regulator |
| MAX6317HUK31CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX934CSE | MaximIC | Quad low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference. |
| MAX795TESA | MaximIC | Microprocessor supervisory circuit. Reset threshold 3.00V to 3.15V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating. |
| MAX2601ESA | MaximIC | 3.6V, 1W RF power transistor for 900 MHz applications. |
| MAX148AEAP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1/2. |
| MAX1488ECSD | MaximIC | +,-15kV ESD-protected, quad, low-power RS-232 line driver |
| ICM7260C/D | MaximIC | Programmable timer/counter |
| IH5044CPE | MaximIC | General-purpose CMOS analog switch. Double pole, single throw (DPST) |
| MAX633BCPA | MaximIC | CMOS fixed +15V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MAX5003EEE | MaximIC | High-voltage PWM power-supply controller. |
| MAX281BCPA | MaximIC | 5th-order, zero-error, bessel lowpass filter. |
| MAX1232ESA | MaximIC | Microprocessor monitor |
| MAX6332UR16D2-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 20ms. |
| MAX6101EUR-T | MaximIC | Low-cost, micropower, low-dropout, high-output-current, SOT23 voltage reference. Output voltage 1.250V, input voltage range 2.5V to 12.6V. |
| MAX1617AMEE | MaximIC | Remote/local temperature sensor with SMBus serial interface |
| MAX4052ACPE | MaximIC | Low-voltage, CMOS analog multiplexer |
| MAX807LEWE | MaximIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.675V |
| MAX6316MUK32AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6317HUK39DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6318MHUK47CW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX399EPE | MaximIC | Precision, dual 4-channel, low-voltage, CMOS analo0g multiplexer. |
| MAX962EUA | MaximIC | Dual, ultra-high-speed, +3V or +5V, Beyond-the-Rails comparator. |
| MAX6504UKN015-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) -15. |
| MAX358CPE | MaximIC | Fault-protected analog 8 channel single-ended (1 of 8) multiplexer. |
