| Μέρος αριθ | Κατασκευαστής | Εφαρμογή |
|---|
| MAX804SEPA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6318MHUK34BW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6379UR36-T | MaximIC | Ultra-low-power voltage detector, 3.6V |
| MAX9687ESE | MaximIC | Dual, ultra-fast ECL-output comparator |
| MAX6320PUK29DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX4609ESE | MaximIC | Low on-resistance (2.5om max), dual, SPST, CMOS analog switches (one NO and one NC switche). |
| MAX691AEJE | MaximIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.65V. |
| MAX512EPD | MaximIC | Low-cost, triple, 8-bit voltage-output DAC with serial interface. |
| MAX4274ABEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 0.25, 1+ (Rf/Dg) noninverting gain 1.25, -3dB BW 1700kHz. |
| MAX4074BDEUK-T | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 20V/V, noniverting gain 21V/V, -3dB BW 40kHZ. |
| MAX6321HPUK35BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6342TUT-T | MaximIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 3.08V. Push-pull active-low reset output, manual-reset input. |
| MAX728ECK | MaximIC | 3.3V fixed output,2A step-down, PWM, switch-mode DC-DC regulator. |
| ICL7665ACPA | MaximIC | Microprocessor voltage monitor with dual overvoltage and undervoltage detection |
| MAX4174ALEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 5, 1+ (Rf/Dg) noninverting gain 6, -3dB BW 790kHz. |
| MAX3317ECAP | MaximIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX1406EPE | MaximIC | +-15V, ESD-protected, EMC-compliant, 230kbps, 3-Tx/3-Rx RS-232 IC. |
| MAX813LCUA | MaximIC | Low-cost, microprocessor supervisory circuit. Active-low manual-reset input. Active-high reset output. Precision supply-voltage monitor 4.65V. |
| MAX4515CPA | MaximIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC), +2V to +12V single-supply operation. |
| MAX4373HEUA | MaximIC | Low-cost, micropower, high-side current-sense amplifier + comparator + reference IC. Gain +100V/V. |
| MAX507ACNG | MaximIC | Voltage-output, 12-bit DAC with internal reference. 12 data-bus widths. Error +-1/2. |
| MAX441EPP | MaximIC | High-speed video multiplexer/amplifier |
| MAX6318LHUK25CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 140ms, typ watchdog timeout 102ms |
| MAX528EAG | MaximIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX500AMJE | MaximIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-1. |
| MAX6321HPUK33DW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX1483EPA | MaximIC | 20 micro A, 1/8-unit-load, slew-rate-limited RS-485 transceiver |
| MX7547AQ | MaximIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-6 LSB. |
| MXD1005PD250 | MaximIC | 5-tap silicon delay line |
| MAX1674EUA | MaximIC | High-efficiency, low-supply-current, compact, step-up DC-DC converter |
