| Μέρος αριθ | Κατασκευαστής | Εφαρμογή |
|---|
| MAX3318ECAP | MaximIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX6321HPUK28BW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX667ESA | MaximIC | +5v/programmable low-dropout voltage regulator |
| MAX6302CPA | MaximIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-high reset, open-drain reset output). |
| MAX810MEUR-T10 | MaximIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 10k increments. |
| MX7547LEWG | MaximIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-1 LSB. |
| MAX6310UK48D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.680(min),4.920(max). Nominal timeout period 1120ms. |
| MAX697EPE | MaximIC | Microprocessor supervisory circuit. Onboard gating of chip enable signals. |
| MAX4517CPA | MaximIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC). |
| MAX4527CPA | MaximIC | Phase-reversal analog switch. |
| MAX6318MHUK46CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6318MHUK32CW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MX584JCSA | MaximIC | Pin programmable precision voltage reference. Error +-30mV. |
| HI3-0201HS-5 | MaximIC | High-speed, CMOS, quad, SPST analog switch |
| MAX442ESA | MaximIC | 140MHz unity-gain bandwidth, 2-channel video multiplexer/amplifier. |
| MX7536BQ | MaximIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-1 LSB. |
| MAX3237ECAE | MaximIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6379UR38-T | MaximIC | Ultra-low-power voltage detector, 3.8V |
| MAX707EPA | MaximIC | Low-cost, microprocessor supervisory circuit. Active-high reset output. Precision supply-voltage monitor 4.65V. |
| MAX6328XR23-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.320V. Standard version. Order increment 2.5k |
| MXD1000PD60 | MaximIC | 5-tap silicon delay line |
| MAX822RUS-T | MaximIC | Microprocessor voltage monitor with pin-selectable power-on reset timeout delay (1ms,max, 20ms,min or 100ms,min). Reset threshold(nom) 2.63V. Active-high reset output. |
| MAX6321HPUK36AW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX6316LUK50AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reser timeout 1ms, typ watchdog timeout 1.6sec. |
| MAX161ACPI | MaximIC | CMOS 8-bit 8-channel data acquisition system. Error 1 7/8 LSB |
| MAX6317HUK36DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1.12ms, typ watchdog timeout 102ms |
| MX7837TQ | MaximIC | Complete, dual, 12-bit multiplying DAC. 8-bit + 4-bit interface. Error (LSB) +-1/2 |
| MAX6363LUT44-T | MaximIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 4.38V. Active-low push-pull reset. |
| MAX6316MUK36AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX800MEPE | MaximIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.4V. Guaranteed power-fail accuracy to +-2% |
