| Μέρος αριθ | Κατασκευαστής | Εφαρμογή |
|---|
| MAX334EWE | MaximIC | High speed quad SPST analog switch |
| MAX6314US26D2-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 2.63V. Reset timeout period(min) 20ms. |
| MAX6336US21D3-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 2.1V, reset timeout(min) 100ms. |
| MAX4556C/D | MaximIC | Force-sense switches (three indepedent SPDT switches, of which one is a force switch and two sense switches). |
| MAX873AMJA | MaximIC | Low-power, low-drift precision voltage reference. 2.5V+-1.5mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX6315US33D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 20ms. |
| MAX1483CUA | MaximIC | 20 micro A, 1/8-unit-load, slew-rate-limited RS-485 transceiver |
| MAX809LEUR-T10 | MaximIC | Microprocessor reset circuit. Reset threshold 4.63V. Push-pull active-high reset. 10k increments. |
| MAX1112CAP | MaximIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX4520EUT-T | MaximIC | Rail-to-Rail, fault-protected, SPST analog switch. |
| MAX111AEWE | MaximIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX6318LHUK27BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.700V min, reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6317HUK43AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX419CSD | MaximIC | 1.2microA max, quad, single-supply op amp. |
| MAX6341EPA | MaximIC | Low-noise, +4.096V voltage reference. Max tempco 1.5ppm/C |
| MAX6318LHUK26AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.630V min, reset timeout 1ms, typ watchdog timeout 6.3ms |
| MXD1000C/D75 | MaximIC | 5-tap silicon delay line |
| DG412DK | MaximIC | Improved, quad, SPST analog switches |
| MAX6321HPUK48CW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX423M/D | MaximIC | +-15V chopper stabilized operational amplifier. |
| DG387ABWE | MaximIC | General purpose CMOS quad analog switch. |
| MAX392EPE | MaximIC | Precision, quad, SPST analog switch |
| MAX6316MUK39BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6318MHUK41DX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6307UK49D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.778(min),5.023(max).Nominal timeout period 1120ms. |
| MAX389MJN | MaximIC | High-voltage, fault-protected analog multiplexer. 4-channel differential (2 of 8). |
| MAX6321HPUK36AY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX166BEWP | MaximIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1 LSB. |
| MAX2511EEI | MaximIC | Low-voltage IF transceiver with limiter and RSSI. |
| MAX6318MHUK33AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
