| Μέρος αριθ | Κατασκευαστής | Εφαρμογή |
|---|
| MXD1000C/D40 | MaximIC | 5-tap silicon delay line |
| MAX6312UK46D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.514(min) 4.746(max). Nominal timeout period 20ms. |
| MAX6309UK28D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.730(min),2.870(max) Nominal timeout period 140ms. |
| MAX4066CSD | MaximIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX9002EUA | MaximIC | Low-power, high-speed, single-supply op amp + comparator. Op-Amp gain stability 1V/V. Op-Amp gain bandwidth 1.25MHz. |
| MAX6310UK29D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.857(min),3.000(max). Nominal timeout period 1120ms. |
| MAX6316LUK33CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 140ms, typ watchdog timeout 102ms |
| ICL7126CPL | MaximIC | Low power, 3 1/2 digit A/D converter |
| MAX6316LUK39BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX364EPE | MaximIC | Precision, quad, SPST, normally closed (NC) analog switch. |
| MAX908MJD | MaximIC | Dual, high-speed, ultra low-power, single 4.4V to 5.5V supply operation TTL comparator. |
| MAX6326XR28-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.800V. Order increment 10k |
| MAX6351LTUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 3.08V (Vcc3). Active-low push-pull reset output 5V and 3V. |
| MAX176BCPA | MaximIC | Serial-output, 250 ksps 12-bit ADC with T/H and reference. Error(LSB) +-1. |
| MAX6314US40D3-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.00V. Reset timeout period(min) 140ms. |
| MAX6321HPUK48DX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6332UR23D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit Reset threshold(typ) 2.3V, reset timeout(min) 1ms |
| MAX6363LUT26-T | MaximIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 2.63V. Active-low push-pull reset. |
| MAX6320PUK26BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MX7506KQ | MaximIC | Single, 16 channel (1 of 16) monolithic CMOS analog multiplexer. |
| MXL1014CN | MaximIC | Quad precision op amp. |
| MAX6307UK42D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.095(min),4.305(max).Nominal timeout period 140ms. |
| DG211C/D | MaximIC | Quad SPST CMOS analog switch. |
| MAX4426CPA | MaximIC | Dual high-speed, 1.5A MOSFET driver. 4.5V t0 18V operation range. |
| ICL7652BIJD | MaximIC | Chopper-stabilized operational amplifier |
| MAX6309UK38D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.705(min),3.895(max) Nominal timeout period 1120ms. |
| MAX6321HPUK35BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MXD1000PD100 | MaximIC | 5-tap silicon delay line |
| MAX763AMJA | MaximIC | Step-down, current-mode PWM DC-DC controller. Input voltage range 3.3V to 11V |
| MAX1202BC/D | MaximIC | +5V, 8-channel, serial, 12-bit ADCs with 3V digital interface, INL (LSB) +1 |
